TUBE CONDENSER MICROPHONE LVM-04

Custom production,
manual assembly and testing

mic-bg

34mm capsule with two gold-plated diaphragms

switch

12 polar patterns

garant

3 years warranty

TUBE CONDENSER MICROPHONE LVM-04

Universal microphone switchable directional characteristic. The switch has 12 positions, which ensures optimum adaptation to your microphone with different acoustic design of the room.

Microphone housing is made of steel with copper plating, which provides good shielding capsule and amplifier.

Previous
Next
lvm1

SPECIFICATIONS

Frequency range
20 Hz - 20 kHz
Polar pattern
mic-diagram
Output impedance
200 Ω
Maximum output level
-10 dB
The nominal output level
-40 dB
Signal / noise ratio relative to 1 Pa
75 dB
Tube base model
6C3P, 6S4P
Length | Diameter
207 mm | 58 mm
Weight
700 g

MICROPHONE HOLDER

Unique holder design ensures reliable fastening of the microphone, the vibration damps undesirable external sources. The design eliminates breakage during drop microphone damping rubbers or in case of loosening.

The holder allows to turn the microphone 180 degrees vertically. Made entirely of metal (duralumin D16-T).

Previous
Next
Previous
Next

POWER SUPPLY NS-O5

The power supply is assembled in steel, according to the traditional scheme of a power transformer, rectifying diodes, capacitors for filtering and voltage regulation circuits filament voltage + 6V, polarization, and the anode power lamps + 120V. On the front panel of the unit is a switch orientation.

Input | Output connector
XLR 6 pin | XLR 3 pin
Mains voltage
110 V | 220 V
Filament current
to 300 mA
Anode current
to 5 mA
Dimensions
210 mm | 115 mm | 80 mm
Weight
950 g

MICROPHONE CABLE

The kit includes 3 cables: 2 microphone (XLR 3 pin | XLR 6 pin) and network. The microphone 6-core shielded cable has an XLR 6pin connector on one end and a special threaded microphone connector on the other.

Length
to 10 m
Weight
0.7 kg
Previous
Next
Previous
Next

CASE MICROPHONE

Case (bag) for carrying, transporting and storing microphone.

Each microphone is packaged in a stationary (plastic / Aluminum) case, with foam filling, which if necessary transformed to suit your requirements.

The size of the model and the material of the case may vary, depending on the configuration of the order, providing full safety and performance microphone kit.

wrap
Проиграть видео
mic_img

MAKE AN ORDER